SsangYong Korando e-Motion Charging Cable
The SsangYong Korando e-Motion uses a Type 2 connector and supports AC charging up to 6.0kW. Whether you are charging at home on a wallbox, at work, or at a public charge point, a quality cable makes the difference.
Recommended cables for the SsangYong Korando e-Motion
Your SsangYong Korando e-Motion uses a Type 2 connector. These are the cables we recommend.
Untethered EV Charging Cable
Type 2 to Type 2 cable for use with home wallboxes and public charge points. Available in multiple lengths and colours.
View Cable
Tethered EV Charging Cable
Replacement tethered cable for your home wallbox charger. Plugs straight into your SsangYong Korando e-Motion's Type 2 socket.
View Cable
Portable EV Granny Charger
Charge your SsangYong Korando e-Motion from any standard UK socket. Ideal as a backup or if you do not have a wallbox installed yet.
View ChargerHow long to charge a SsangYong Korando e-Motion?
Estimated charging times from 10% to 80% based on a typical 50kWh battery.
| Charging Method | Power | Est. Time (10-80%) | Best For |
|---|---|---|---|
| 3-pin plug (portable charger) | 2.3kW | ~15 hours | Emergency / overnight top-up |
Times are estimates. Actual charging time depends on battery size, state of charge, temperature, and the car's onboard charger. Your SsangYong Korando e-Motion supports a maximum AC charge rate of 6.0kW.
Will a Wottz cable work with my SsangYong Korando e-Motion?
Yes. The SsangYong Korando e-Motion uses a Type 2 connector, which is the standard for EVs sold in the UK and Europe. All Wottz Type 2 cables are fully compatible.
Our untethered cable (Type 2 to Type 2) works at any public or workplace charge point with a Type 2 socket. The tethered cable is a direct replacement for your home wallbox cable. And the portable charger lets you charge from a regular 3-pin socket without a wallbox.
Frequently asked questions
-
The SsangYong Korando e-Motion uses a Type 2 connector. For charging at home with a wallbox, you need a Type 2 to Type 2 untethered cable (or a tethered replacement cable if your wallbox has a socket). For charging from a regular plug socket, use a portable charger with a Type 2 connector.
-
The SsangYong Korando e-Motion supports AC charging up to 6.0kW. With a 6.0kW home wallbox, a typical charge from 10% to 80% takes around 6 hours. From a standard 3-pin socket using a portable charger (2.3kW), the same charge takes around 15 hours. Most SsangYong Korando e-Motion owners charge overnight, so even slower speeds are usually fine for daily driving.
-
Yes. A portable charger lets you charge your SsangYong Korando e-Motion from any standard UK 13A socket at 2.3kW. It is slower than a dedicated wallbox, but perfectly safe and practical for overnight charging or as a backup when you are away from home. Many owners keep a portable charger in the boot for exactly this reason.
-
It depends on the distance between your charge point and your car's charging port. For most home setups, a 5m cable is plenty. If your charger is on the opposite side of a garage or driveway, go for 7.5m or 10m. Measure the distance and add a metre or two for comfort. Longer cables are heavier, so do not buy more than you need.
-
Every Wottz cable comes with a comprehensive warranty and is built to last. Our cables are IP55 rated, CE certified, and tested to work in temperatures from -30°C to +60°C. We also offer a cable repair service and optional Wottz Care protection plan for complete peace of mind.
Not sure which cable you need?
Use our cable finder to get a personalised recommendation based on your car's registration or model.
Find My Cable