Dongfeng M-Hero 1 Charging Cable
The Dongfeng M-Hero 1 uses a Type 2 connector with AC charging up to 11.0kW, and supports vehicle-to-load (V2L) to power appliances from its battery. Find the right charging cable and V2L accessories below.
Recommended cables for the Dongfeng M-Hero 1
Your Dongfeng M-Hero 1 uses a Type 2 connector. These are the cables we recommend.
Untethered EV Charging Cable
Type 2 to Type 2 cable for use with home wallboxes and public charge points. Available in multiple lengths and colours.
View Cable
Tethered EV Charging Cable
Replacement tethered cable for your home wallbox charger. Plugs straight into your Dongfeng M-Hero 1's Type 2 socket.
View Cable
Portable EV Granny Charger
Charge your Dongfeng M-Hero 1 from any standard UK socket. Ideal as a backup or if you do not have a wallbox installed yet.
View Charger
V2L (Vehicle to Load) Discharge Cable
Turn your Dongfeng M-Hero 1's battery into a portable power station. Power appliances, tools, or your home during an outage.
View V2L CableHow long to charge a Dongfeng M-Hero 1?
Estimated charging times from 10% to 80% based on a typical 65kWh battery.
| Charging Method | Power | Est. Time (10-80%) | Best For |
|---|---|---|---|
| 3-pin plug (portable charger) | 2.3kW | ~20 hours | Emergency / overnight top-up |
| Home wallbox (single phase) | 7.4kW | ~6 hours | Daily home charging |
| Wallbox / destination (3-phase) | 11.0kW | ~4 hours | Fastest AC option for this car |
Times are estimates. Actual charging time depends on battery size, state of charge, temperature, and the car's onboard charger. Your Dongfeng M-Hero 1 supports a maximum AC charge rate of 11.0kW.
Will a Wottz cable work with my Dongfeng M-Hero 1?
Yes. The Dongfeng M-Hero 1 uses a Type 2 connector, which is the standard for EVs sold in the UK and Europe. All Wottz Type 2 cables are fully compatible.
Our untethered cable (Type 2 to Type 2) works at any public or workplace charge point with a Type 2 socket. The tethered cable is a direct replacement for your home wallbox cable. And the portable charger lets you charge from a regular 3-pin socket without a wallbox.
V2L capable: Your Dongfeng M-Hero 1 supports vehicle-to-load (V2L), meaning you can use its battery to power appliances and devices. You will need a V2L discharge cable to do this.
Frequently asked questions
-
The Dongfeng M-Hero 1 uses a Type 2 connector. For charging at home with a wallbox, you need a Type 2 to Type 2 untethered cable (or a tethered replacement cable if your wallbox has a socket). For charging from a regular plug socket, use a portable charger with a Type 2 connector.
-
The Dongfeng M-Hero 1 supports AC charging up to 11.0kW. With a 11.0kW home wallbox, a typical charge from 10% to 80% takes around 4 hours. From a standard 3-pin socket using a portable charger (2.3kW), the same charge takes around 20 hours. Most Dongfeng M-Hero 1 owners charge overnight, so even slower speeds are usually fine for daily driving.
-
Yes. A portable charger lets you charge your Dongfeng M-Hero 1 from any standard UK 13A socket at 2.3kW. It is slower than a dedicated wallbox, but perfectly safe and practical for overnight charging or as a backup when you are away from home. Many owners keep a portable charger in the boot for exactly this reason.
-
It depends on the distance between your charge point and your car's charging port. For most home setups, a 5m cable is plenty. If your charger is on the opposite side of a garage or driveway, go for 7.5m or 10m. Measure the distance and add a metre or two for comfort. Longer cables are heavier, so do not buy more than you need.
-
Yes. The Dongfeng M-Hero 1 supports vehicle-to-load (V2L), which lets you draw power from the car's battery to run appliances, power tools, or even your home during an outage. You will need a V2L discharge cable, which plugs into the car's charge port and provides a standard UK socket on the other end. The Wottz V2L cable is available with 1-gang or 2-gang outputs in multiple lengths.
-
Every Wottz cable comes with a comprehensive warranty and is built to last. Our cables are IP55 rated, CE certified, and tested to work in temperatures from -30°C to +60°C. We also offer a cable repair service and optional Wottz Care protection plan for complete peace of mind.
Not sure which cable you need?
Use our cable finder to get a personalised recommendation based on your car's registration or model.
Find My Cable